|
www.MouldDog.ca
Home of Canada's first Certified Mould Detection Dog
"Quincy" is a five year old yellow Labrador
Retriever that has been professionally trained and certified to
sniff out mould.
Together with our state-of-the art Indoor Air Quality Testing
instrumentation, our Mould K-9 and our expertise, we're confident we
can assist you in your environmental issues in your home or office.
Speak to one of our certified mould inspectors about your mould
concerns today
The Mould Dog Advantage
Having a mould detection dog allows us to pin point the exact
location of the mould growth inside a wall or floor. In the past,
this was very difficult, if not impossible, with air testing
alone. The result is less laboratory sampling, less cost to you and
faster results. There is no other tool like
it!
Please visit our web site for more information:
www.MouldDog.ca
Mould Testing
We use a variety of instrumentation to determine if a building
has mould.
- Visual Inspection
- Laser airborne particle counter
- Borescope
- MVOC detector
- Mould dog
- Moisture meters
- Thermal Imaging
- Surface Water Activity
- Laboratory sampling
|
New or old,
if buildings get wet, mould will grow .
The age of the building has no bearing on
whether there could be a mould issue.
If you've had roof leaks, basement leaks, plumbing
leaks, high relative humidity or condensation indoors,
you could have a hidden mould problem. 80% of indoor
mould issues are hidden and don't produce odors or
visible growth. They can however, cause a variety of
health problems. Inhaling mould
spores is what triggers the health issues related to
mould growth indoors. |
|
See our Indoor Air
Quality Web Sites
An air quality assessment together
with a mould inspection can uncover hidden sources
of pollutants in your home or office. A proper
mould inspection should never be just a quick visual
inspection and a few laboratory samples. Proper
mould assessments should begin with a comprehensive
instrument survey for air quality to identify and
locate hidden pollution levels indoors. This will
assist in determining where and what type of
laboratory analysis is appropriate and will assist
in identifying the cause of an indoor mould
problem. A qualified mould inspector should also
identify the source and extent of the moisture
damage that lead to the mould problem using thermal
imaging and moisture meters. This can determine if
area are still actively growing mould. Finally, the
mould detection dog can locate specific areas of
mold growth.
A proper instrument survey for air
quality, thermal imaging and moisture survey, mould
detection K-9 and a series of surface and air
samples for mould spores can provide the mould
inspector with detailed information on the cause,
source and solution of the mould growth issue in
your building.
If you have a mould issue, believe
you have a mould issue or are unsure whether mould
or air quality problems are affecting your
health...call us today. |
|
We service the following areas:
Toronto,
Mississauga, Oakville, Burlington, Brampton, Hamilton, Guelph,
Kitchener, Waterloo, Cambridge, St. Catharines, Niagara Falls,
Barrie,
King City, Maple, Richmond Hill, Thornhill, Pickering,
Whitby, Ajax, Oshawa
and other areas.
Haverkate
& Associates Inc.
(905) 882-2202
|
|
|
Rid
your home of annoying pests today. Terminix®, the
world’s largest pest control company, will treat the
inside and outside of your home to eliminate mice, ants,
roaches, and other pests for good. Call Terminix with
your pest problem and you’ll have a solution within 24
hours. Total satisfaction is guaranteed.